Archive for 2009

Top 10 In-Ground Swimming Pool Issues

Tuesday, August 18th, 2009

There are many issues that in-ground swimming pool owners can experience during the life of their pool. Below is our top ten:

10: Water table

The level of the water table in the ground can affect your pool’s construction and how it will respond to changing climatic conditions. If the ground water table is high, your pool can be subject to “floating” in the ground. Keeping the water level in the pool stable helps combat the pool from floating up.

In most areas, pools will have a hydrostatic valve installed to help proper equalization of the water table with the pool water level.

If a leak occurs and the ground water table is low, then a leak will be quickly absorbed by the surrounding ground, and possibly wash away the dirt from around the leakage point causing voids around the pool structure.

(more…)

Gunite Swimming Pool Repair Explained

Thursday, July 23rd, 2009

What is gunite?

Gunite is a mixture of cement, sand, and water that is sprayed on a surface under pneumatic pressure.

Gunite, along with a rebar frame, is used to create the structure of the pool. Plaster is then applied to create a water barrier. Gunite is porous and should not be used by itself to construct a pool. There must be a water barrier between the porous gunite and the water. If the plaster is not thick enough, it could allow water to seep through the gunite. This will result in water loss that is difficult to isolate without draining the pool. There are methods for repairing a pool that is not properly sealed with enough plaster.

(more…)

American Leak Detection at BOMA 2009 in Philadelphia

Monday, July 20th, 2009

boma-2009-tradeshowThe BOMA International Conference and The Office Building Show was held in Philadelphia “the city of brotherly love” on June 29-30, 2010. Philadelphia, whose name translates from Greek to Brotherly Love, hence its naming by William Penn.

The exhibition ran for three days in between lectures. Total attendees for the conference were 2,379, with 86 attendees visiting the American Leak Detection booth. Of those that visited, 20% had immediate leak detection needs. The B-Environmental line of eco-friendly products and services also caught a lot of attention, much of which was from the Midwest and East Coast.

Look for American Leak Detection at next year’s show in Long Beach, June 27-29, 2010.

The Dangers of Your Backyard Pool

Monday, June 29th, 2009

There may be no activity more synonymous with summer fun than the “splish, splash” of swimming in a backyard pool.  Unfortunately, however, there are hazards lurking in and around most pools that families often overlook. In order to keep pool safety top of mind, American Leak Detection is offering people tips to prevent pool-related injuries.  Whether you have a pool and spa or your family enjoys cooling off in a community pool, this information shouldn’t be missed.

While people of all ages and sizes are susceptible to the dangers of faulty pool drains, young children tend to be at the highest risk.  According to the Centers for Disease Control (CDC), more than one in four drowning victims are children age 14 and younger.  For every child who has died from drowning, another four have received emergency care for nonfatal submersion injuries.

Take the following preventative measures before allowing swimmers to enter their pools:

  • Replace old flat drain covers and never use a pool or spa with a missing or broken drain cover.
  • For public pools, install anti-vortex drain covers.  A simple retrofit to install anti-entrapment covers will protect both children and adults from body and hair entrapment in the suction outlets.
  • Have a professional regularly inspect the pool or spa for entrapment or entanglement hazards.  Ask them to clearly mark the location of the electrical cut-off switch for the pool or spa pump.
  • Install a Safety Vacuum Release System (SVRS) to automatically shut off a pump if a blockage is detected.
  • If someone is trapped against a drain, immediately turn off the pump.  Pry a hand between the drain and the person’s body to break the seal instead of trying to pull the person away from the powerful suction.

The summer season is a carefree time of year, but that does not mean that people should take a carefree approach to proper pool maintenance.

Does a ‘humming’ noise from under the sink indicate a leak?

Friday, June 26th, 2009

Usually yes. A ‘humming’ sound coming from a water pipe is often a good indication of water loss occurring somewhere along the piping system. This can occur in two ways: Loss through a fixture or outlet (i.e. faucet or leaky toilet) or loss through an actual leakage point along the line.

It is pretty easy to understand the way a running fixture makes noise on pipes. Water flows at a rapid rate through the line and causes the pipe to vibrate as the water leaves the outlet. Also, friction created by the water flow against the inside of the pipe sends vibrations that can be detected by the human ear.

The sound created by a leak in the pipe itself is a little more complex to understand. Essentially, the humming sound created by a leak in the pipe is driven by a pressure difference between the water inside the pipe and the ambient atmospheric pressure around the pipe.

When a leak develops in a pipe, a pressure loss occurs in the pipe at the leak site as the pressure in the pipe tries to equalize with the pressure outside the pipe. This pressure loss creates pressure waves that travel in both directions down the pipe and away from the leak. We call this ‘leak energy.’

In most cases, the human ear alone cannot hear this leak energy. It takes electronic leak detection tools that amplify selected sounds. If you can hear the leak energy without equipment, there is a good chance the leak is close by or has developed in size enough to be quite loud.

If the humming sound you hear is not from flow or a leak in the pipe, a contact point between the pipe and a vibrating appliance or machine such as a refrigerator or air conditioning unit could also cause it.

In any of the cases mentioned above, you can save some time and money by taking a look around your home for some obvious clues. Double-check all of your interior faucets and toilets. Check outside hose bibs and valves, too. If you don’t find anything, you may need to call a leak detection specialist to perform further investigation with specialized electronic equipment and professional experience.