Pool Leak Repair in Chandler

Signs Your Pool May Be Leaking

Normal evaporation and splash-out cause some water loss, but repeated or unexplained level changes may indicate a leak. A single symptom won’t identify the source, so note when the problem occurs and whether the pool equipment is running at the time.

Warning signs worth investigating include:

• An autofill valve that runs constantly
• Frequent refilling beyond normal maintenance
• Wet or soggy areas near the pool or equipment pad
• Air emerging from return jets
• Equipment that repeatedly loses prime
• Cracks or settling around the pool
• An unexplained increase in household water use

Use a Bucket Test to Compare Water Loss

The City of Chandler recommends a bucket test as an initial comparison between pool water loss and evaporation. Place a bucket containing pool water on a pool step, mark the water level inside the bucket and the pool level outside it, then compare the changes after the same amount of time. If the pool loses more water than the bucket, a leak may be present.

Evaporation varies with air temperature, humidity, wind, sunlight, shade, and water volume. Comparing results with the pump running and turned off may also indicate whether circulation affects the loss. However, a bucket test can’t locate the source.

An autofill can conceal a leak by continuously replacing lost water. According to the City of Chandler, a stuck or malfunctioning autofill valve can waste up to 30,000 gallons in a single month. Constant or unexplained autofill operation is a strong reason to investigate.

How Non-Invasive Pool Testing Works

We select testing methods based on the pool configuration and reported symptoms. Pressure testing determines whether an isolated plumbing line holds pressure, while acoustic leak detection uses sensitive listening equipment to identify sounds associated with escaping air or water.

Dye testing may reveal openings around fittings or the pool shell. Moisture meters and thermal methods can provide additional information when conditions call for them. Pools with in-floor pop-up heads require more-extensive testing because multiple connected lines or components may need to be isolated.

These methods help determine whether water loss originates in the structure, plumbing, equipment, or a connected feature. Testing can often proceed without excavating the deck or draining the pool.

What Happens After We Locate the Leak

The written leak report identifies the suspected location and helps determine whether repair work should focus on plumbing, equipment, fittings, an in-floor system, or the pool shell. It also gives the homeowner or repair provider clearer information for planning the next step.

Detection findings guide the repair decision, but the repair price and timeline depend on the confirmed source, access requirements, and condition of the affected component.

Plan Your Pool Leak Repair in Chandler

Accurate detection provides the information needed to choose a focused repair path without unnecessary excavation or guesswork. Schedule an evaluation after confirming that your pool will be full, clean, and clear for testing. There’s no fee to reschedule if your plans change.

Call (602) 483-4136 to request your pool leak detection appointment.